Kitchen chimney buying guide · Houme India

Pehle kitchen.
Phir chimney.

Choose with your kitchen layout, cooking routine and installation in mind. Then compare the models and the complete cost.

Start with Sourabh’s video or answer a few questions to prepare your discussion brief.

Conceptual chimney illustration in a sage and stone kitchen
Illustrative kitchen concept, not a specific appliance or completed Houme project.
Learn with Sourabh

Watch the original chimney guide

Watch on YouTube. Verify current model details and installation requirements before buying.

First, understand the air route

Ducted extraction

Air is extracted through a duct to the outside. Review the route and installation provisions for the selected model.

Recirculation

Air passes through the appliance’s filtration system and returns to the room. Check supported accessories and filter care.

Conceptual flow diagrams, not installation drawings. Bosch’s buying guide describes both configurations and manufacturer-supported adaptation kits.

A practical starting point

Prepare your kitchen brief

Answer the questions, then take the resulting checklist to your designer, supplier or installer. The helper does not calculate airflow or choose a guaranteed fit.

No contact details are requested. The brief is generated in this page and clears when you reload.

1 · Your kitchen and installation

Leave blank if you have not measured it. Burner count alone is not a measurement.

2 · Your cooking routine
3 · Your comparison priority

Installation requirements still need checking whichever priority you choose.

4 · Compare exact models

Seven references from Houme’s original guide

Use these names as starting points for a model discussion. The groups reflect the original guide’s budget, feature, design and rental themes; they are not an automatic suitability result.

Manufacturer references checked on 15 September 2026. Full model names and any unresolved differences are shown below. These are manufacturer-listed features, not independent performance tests. Request a current, itemized installed-price quote; prices and stock can change.

Budget focus · Bhide

Original guide reference

Elica FLAT FL 600 HAC

Model to check: FLAT FL 600 HAC LTW MS NERO

Full model name found in Elica’s catalogue; confirm that this is the variant in your quotation.

  • Catalogue describes a 60 cm model with a three-speed AC motor.
  • Heat auto-clean, motion controls and an oil collector are listed.

The original guide’s shortened name and 1200 CMH figure do not identify the exact variant. Confirm the current data sheet before comparing airflow.

Elica product catalogue
Original guide reference

Hindware Nadia

Model to check: Hindware Nadia

The original model reference is retained; a matching current official product page has not been located.

  • Ask Hindware to confirm the full model code, current availability and service support for the quoted unit.

Do not substitute specifications or warranty terms from a different Hindware chimney.

Hindware appliance support

Feature comparison · Jethalal

Original guide reference

Faber Hood Coral BLDC

Model to check: HOOD Coral HC SC FL BK BLDC IN 90 – T

Specific current Coral-family example: SKU 325.0738.742. The original guide did not give a full model code.

  • Manufacturer lists a 90 cm wall-mounted, filterless model with a BLDC motor.
  • Listed airflow: 1500 m³/h. Heat auto-clean is included.

Confirm the exact model and its installation drawing. The product page contains conflicting dimension entries, so those dimensions are not reproduced here.

Faber Coral 90-T product details
Original guide reference

Elica WDFL BLDC

Model to check: WDFL 600 BLDC HAC LTW MS NERO

Specific 60 cm WDFL BLDC model; confirm the complete suffix on the quote.

  • Official product page lists an 80 W BLDC motor, filterless design and nine-speed motion controls.
  • Heat auto-clean and an oil collector are listed.

Elica’s product page lists 1425 m³/h, while its catalogue lists 1500 m³/h for this model name. Ask for the data sheet for the unit being supplied; neither number is used here as a suitability calculation.

Elica WDFL product details

Design focus · Rajnikant

Original guide reference

Faber Hood Zenith Slant

Model to check: HOOD ZENITH FL HC SC BK IN 90

Specific current Zenith-family example: SKU 330.0710.828. It is not confirmed as the original guide’s “Zenith Slant” variant.

  • Manufacturer lists a 90 cm filterless model with 1400 m³/h airflow.
  • The feature list includes heat auto-clean, an odour sensor and touch, gesture and remote controls.

Verify the desired shape and exact model before ordering. Conflicting dimensions on the manufacturer page need an installation-drawing check; a BLDC motor is not assumed.

Faber Zenith 90 product details
Original guide reference

Beyond Orion Android

Model to check: Orion Chimney (AC, 90 cm)

The manufacturer’s linked current Orion variant is labelled AC, 90 cm; do not assume the original guide’s BLDC description applies.

  • The manufacturer presents Orion as a smart-display chimney.
  • The selected product page showed a sold-out status when reviewed.

Check the selected motor variant, stock and installed cost before comparing it with another Orion listing.

Beyond Orion selected variant

Installation restrictions · Rental friendly

Original guide reference

Beyond Cube Plug & Play

Model to check: Plug ’N’ Play Chimney (Black, BLDC)

The manufacturer’s Cube product URL now displays this named variant; it is not confirmed as the original ₹12,499 unit.

  • The current manufacturer page identifies a black BLDC variant.
  • The manufacturer promotes this range without an external duct or core cutting.

Confirm the actual size, mounting arrangement, supplied filters and replacement-filter costs. The original guide’s universal-size claim is not retained.

Beyond Plug ’N’ Play product details

Before installation, record the essentials

01

Clearance and mounting

Record the required clearance for your exact hood and hob, together with the approved mounting arrangement. Use their installation instructions.

02

Route and accessories

Confirm the approved duct specification and route, or the supported recirculation kit and filters. Include the required parts in your quote.

03

Care and service

Ask for a cleaning demonstration and the written maintenance schedule. Check warranty coverage and service availability in your location.

Questions worth asking

Does auto-clean mean no manual cleaning?

Follow the selected model’s care instructions. Auto-clean does not establish that all parts are maintenance-free; ask which collectors, filters and surfaces still need attention.

Can I choose size from burner count alone?

Bring the measured hob width and model number to the installation review. Check the appliance documentation and planned position together.

Does a BLDC label guarantee a fixed annual saving?

Compare the models’ rated power and your expected use. A saving estimate also needs an electricity tariff and a clear comparison; the motor label alone does not supply those inputs.

Can a rental home use a recirculating model?

Ask about building permissions, approved mounting and the manufacturer-supported configuration. Rental status alone does not establish that a specific model will fit.

Sourabh Jain presenting an interior material sample

Plan the appliance with your kitchen

Connect your shortlist to the room layout and the decisions still ahead.